SLIP 2000 EWL30

Slip 2000 EWL30 has the same properties as the EWL except it is a lot thicker. It contains a proprietary thickening agent that makes this lubricant consitency like a 30wt. motor oil. It was designed for those who love the EWL, but wanted a lubricant that would not migrate at all and did not want to use a grease. EWL 30 IS a fantastic CLP (cleaner, lubricant, protector)

Slip 2000 EWL30 has incorporated advanced technology additives to enhance film strength and anti-wear properties. Penetrating the pores and bonding its self to the surface of the metal through physical absorption reducing surface tension thereby reducing friction between moving parts and minimizing wear and the build-up of wear related debris.

Slip 2000 EWL30 will not dry out or attract dust or dirt particles like petroleum products. Even when surface is wiped dry to the touch Slip 2000 EWL30 is still present and lubricating the metal parts from within the pores of the weapon. This product does not require a liquid carrier to be present for protection. Slip 2000 EWL30 does not evaporate off because there are no carriers needed for continued protection.

Slip 2000 EWL30 provides additional protection through additives that in addition to the ability to penetrate between metal surfaces, it will also aid in the effective removal of built up dirt, lead, copper, carbon, corrosion particles and firing residues that can buildup and become abrasive to both recoil and gas operated mechanisms.

After cleaning, a micro thin film of our enhanced preservative immediately bonds itself and forms a barrier film on the surface that displaces water and provides a corrosion resistant barrier against rust and dirt. It is designed to give protection against hydrogen sulfide (H2S), mild mineral acids, carbon dioxide (CO2), saltwater and brackish environments, musky water, chlorine and similar adverse environments and has passed the Salt Spray Corrosion (ASTM B-117) 150 Hour test. Additionally a barrier of protection is formed to protect against all other fouling of lead, carbon, copper and plastic wad.

Slip 2000 EWL is formulated to meet the complete requirements of cleaning, lubricating, and preserving both small and large caliber weapons in virtually all climate conditions. Apply to weapons metal surface liberally on first application. Allow to penetrate surface on first application approximately 5 to 10 min. Wipe excess lubricant from surface to leave a dry surface to the touch. This will also help when it comes to dirt not sticking to a dry weapon. As weapons are used and heat up the Slip 2000 will penetrate even deeper into the pores of the metal. On second cleaning these pores will fill in with additional Lubricant and a new protective barrier will be formed making the second cleaning much easier and faster.

Slip 2000 EWL meets most and exceeds requirements of MIL SPEC: MIL-PRF-63460D (6)

Kinematics Viscosity (ASTM D445) -59° F…Pass

Falex Load Carrying Capacity (ASTM D3233) +4500 lbs…Pass

Corrosion Test (ASTM-B-117) 150 Hr…Pass

Rust Resistance (ASTM D-665) Test A…Pass Test B…Pass Modified Test C…Pass

• Increased pattern consistency
• Increased bolt action
• Increased Muzzle velocity
• Increased distance
• Decreased recoil, friction, heat and wear
• Decreased Malfunction or jamming

• Will not attract dust, dirt or sand like petroleum products
• Will not harden or become tacky
• Will not dry out and leave unprotected metal behind
• Will reduce cleaning frequency
• No need for 5 or 6 other potential dangerous cleaners
• Contains No Petroleum distillates or other toxic ingredients

Apply to all moving parts of the mechanism and all parts that require lubrication and / or protection from corrosion.

ALWAYS MAKE SURE YOUR FIREARM IS UNLOADED BEFORE STARTING YOUR CLEANING PROCESS.