Description
725 Gun Cleaner is our all-purpose cleaner. Our concentrate mixes as 1 part concentrate to 4 parts water for a standard strength 725, or use less water for a stronger cleaner. It will cut through cosmoline, grease, and grime. It can be sprayed on directly or used in parts washers, solvent tanks and ultrasonic cleaners!
1 gallon of concentrate with 4 gallons of water makes 5 gallons of standard strength 725.
INSTRUCTIONS:
- Mix 1 part concentrate with 4 parts water to make a standard strength cleaner, or use less water for a stronger cleaner.
725 Gun Cleaner should truly be called Super Degreaser judging from the way it out-performs competitive products. This cleaner will cut through the toughest cosmoline, carbon, grease and grime! Its super strength allows it to degum and degunk the dirtiest of gun parts when sprayed on or used in parts washers or solvent tanks!
Inhibited to help protect sensitive metals, 725 Gun Cleaner has been thoroughly tested in the field by shooters and gun smiths and has come through with flying colors! Hands-on Gunsmiths and Armors praise how quickly it dissolves in warm water, how well it works in both hard and soft water, how freely it rinses to leave parts bare-metal bright, how long it lasts for savings in product upkeep and disposal cost reduction.
Documents
Applications
In just a few minutes, 725 Gun Cleaner / Degreaser will strip tenacious carbon stains and simultaneously, crack open and crumble heavily encrusted deposits of carbon, grease, grime, gum and gunk on aluminum, magnesium, stainless steel and other metal gun parts. Included are trigger assemblies, bolts, actions, slide rails, gas pistons and all other components. Works exceptionally well on M1 – M16 – AR15 – 9 mm – 40 caliber weapons, Black Power breach plugs and all other fully automatic weapons.
Other Applications
725 Gun Cleaner / Degreaser can be used in or with parts washers, ultrasonic cleaning systems and foaming brushes, portable foamers, diesel foamers, air operated foamers and many other foam generating cleaning dispensers.
Features & Benefits
Water based avoids environmental and health safety issues
Non-Caustic helps eliminate caustic burns and fumes
Non-petroleum helps eliminates fire hazard and disposal problems
Product Characteristics
725 Gun Cleaner / Degreaser is a biodegradable, non-solvent solution non-flammable water based product. This product contains quality surfactants, wetting agents, emulsifiers, cleaners and rust inhibitors. Rinses freely and is compatible with most oil water separators.
To help prevent rusting, users must apply a Slip 2000 Gun Lubricant immediately after cleaning to disperse any moisture in parts.
SUGGESTED OPERATION CONDITIONS
As a Cleaner
Used in Parts washers, vibratory or ultra sonic devices and spray bottles
Dilution rate – Ready to use
Temperature range – Ambient / Room temperature to 180°F (up to 71°C)
Dwell time – 10 to 60 seconds, or longer if necessary
Rinse evenly and apply a Slip 2000 Gun Lubricant
For best results:
For heavier soils and deposit buildup, higher concentrations may need to be used. Using product at higher temperatures (160° – 200°) may speed soil release up and allow less soak time.
Disposal Methods
Skim oil from waste water and immersion tanks. Dispose of oil and cleaner in accordance with state, federal, and local ordinances. The pH of the waste water and the splitting characteristics of the cleaner may allow it to be put down a sanitary sewer. (Check With Local Regulators)
Shipping
May be shipped as a non-regulated cleaning compound
Storage
Keep container closed. May be stored safely at high and low temperatures normally encountered. Protect containers from freezing.
